2013/04/02

Windows Server 2012 > RemoteFX 3D ビデオ アダプターに関する詳細情報

RemoteFX 3D ビデオアダプター(vGPU) について、よくまとまってます。ようやくこのような情報が出てきました。

Wiki > TechNet Articles  > RemoteFX vGPU Setup and Configuration Guide for Windows Server 2012
[URL] http://social.technet.microsoft.com/wiki/contents/articles/16652.remotefx-vgpu-setup-and-configuration-guide-for-windows-server-2012.aspx

でも...

2. Requirements for RemoteFX vGPU

Windows Server 2012のフルインストール (GUI使用サーバー)が必要だという要件は見逃しがち(注 4/25 追記を参照↓)。ただし、RemoteFX vGPU を使わないのであれば、Windows Server 2012 Server Core でも、Microsoft Hyper-V Server 2012 でも RD 仮想化ホストの役割サービスはサポートされます。誤解しないように。あくまでも、RemoteFX vGPU の要件です。

A “Full Installation” of Windows Server 2012 with the Hyper-V and Remote Desktop Virtualization Host roles enabled. ◦Note: Remote Desktop Virtualization Host role is not supported on Windows Server 2012 Core use full installation option for Windows Server 2012 instead.

Windows Server 2008 R2 SP1のときは、Server CoreやMicrosoft Hyper-V Server 2008 R2 SP1でもRemoteFXの役割サービス(Microsoft-Windows-RemoteFX-Host-Package)はサポートされていました。

Hyper-V Server 2008 R2 も SP1 ! RemoteFX にはこれが最適 (2011/03/04)

ですので、Server CoreやMicrosoft Hyper-V Server 2012でもRemoteFX vGPUの割り当てと仮想デスクトップの起動はできるかもしれませんが(試してませんが)、フルインストールじゃないと利用できない何かが(コーデックとかエンコーダーとか?)があるのかもしれません(想像です)。

2013/04/25 追記) こちら (↓) を見る限り、Server Core や Microsoft Hyper-V Server 2012 でも大丈夫な感じがする。

What's New in Microsoft Hyper-V Server 2012
[URL] http://technet.microsoft.com/en-us/library/hh833682.aspx

Improved support for RemoteFX| New
| RemoteFX virtualizes 3D graphics hardware.
4. Installation and configuration of RemoteFX vGPU virtual machine with vGPU enabled? 

以下の記述は正しくないです。

After the virtual machine restarts, you will see a black screen on the virtual machine console with the message “Video Remoting was disconnected. The virtual machine is using the 3D video adaptor, which is not supported by the Virtual Machine Connection console.” This is expected, and you will not be able to log on to the virtual machine from the Virtual Machine Connection. You will be able to remotely log on to the virtual machine by using an account that is a member of the Remote Desktop Users group on the virtual machine.


Windows Server 2008 R2 SP1では仮想マシン接続はコンソールに接続できませんでしたが、Windows Server 2012ではできます。
ゲストが Windows 7 Enterprise SP1 でもできます。
ただし、仮想デスクトップにリモートデスクトップ接続している間は、「ビデオ リモート処理の接続は解除されました」と表示されます。
なお、Windows 7 Enterprise SP1 にRDP 8.0 更新(KB2592687)をインストールして、グループポリシーで RDP 8.0 を有効化する場合、RemoteFX vGPU の使用はサポートされません。実際やってみると、一見、使えているように見えるのですが、何か問題があるのでしょう。なにせ、Windows 7 Enterprise SP1に組み込まれている RemoteFX vGPU のデバイス ドライバーは、RDP 8.0 をしゃべれないはずですから。

(↑RemoteFX vGPU を RDP 8.0 な Windows 7 Enterprise SP1 で使えているところ。ちゃんと動いているように見えるけど、サポートされない構成)

5.11 What monitor configurations are supported when connecting to a Windows 8 Enterprise virtual machine with vGPU enabled? 

最大解像度と最大モニター数の表は目新しい。気にしたこと無かったです。Windows 8 Release Preview ってなってますが、Windows 8でも同じだと思います。

UI 的には、こういう表にしたほうが分かりやすいかも。あと、VRAM 使用量の一覧あるとうれしいいんですが。

最大解像度  最大モニター数
1024×768  1~8
1280×1024 1~8
1600×1200 1~4
1920×1200 1~4
2560×1600 1~2



0 件のコメント: